Zinc Electroplated Hook Brake Pad Backing Plates

Higher Bonding Performance and No Need Gluing Before Production
Stable Braking Performance During Your Driving
Longer Working Life of Your Brake Pads
Safety Guarantee for Your Life
Adapt To Different Conditions of Roads

1. Height: 1.70mm±0.3mm

2. Shovel Mouth After Hook Provide Stronger Shear Strength

3. Width of Hooks: 2.0mm±0.2mm

4. Distance Between Hooks Lines: 4.0mm-6.0mm

5. Distance Between Two Hooks: 6.0mm

Beautiful Appearance

No Pollution During Production
and Working On Car

Stable Braking Performance 
Guarantee Your Safety

Noiseless Braking On Roads

Longer Working Life 
Trivalent Chromium Galvanized Coaing
Environmental Friendly
Hang-On Type For 100% Parts CoatedFully and Closed Automatic Production LineThickness ControllableLong Time Anti-Rust Performance

1. Backing Plates is designed and made by advanced solution, the surface of friction side is full of hooks, with height over 1.5mm.
2. Hooks will dig into the friction materials, deeply rooted, thus to improve the shear bonding strength greatly.
3. Shear Force up to 45KN, combinding with gluing technology. Very suitable for the high-speed and high-horsepower rally matches.
4. Glue will cover the full surface of backing plates, greatly improving the bonding strength between the friction material and the steel back

  1. Using high Quality of Q235B Steel, wih better strengh yield performance.
  2. Flatness is controlled within 0.1-0.2mm.
  3. Molds are designed according to the FMSI standard drawings.
  4. Accurate size with tolerances to match OE brake capilers and brake discs.
  5. Good performance to guarantee the brake pads with noiseless and stable brakings.